DeLonghi Eletta Cappuccino Top & Primadonna Class Dregs Drawer / Waste Coffee Grounds Container 7313235401 | Fix “INSERT GROUNDS CONTAINER” Error
Restore correct waste detection and brewing operation with this DeLonghi Eletta Cappuccino Top and Primadonna Class dregs drawer (waste coffee grounds container) designed for selected high-end automatic espresso machines.
This replacement container is commonly required when the original drawer becomes worn, cracked, or has a broken locking tab causing tray detection errors and brewing lockouts.
🔧 Product Overview
The dregs drawer is an essential internal waste collection component in DeLonghi automatic coffee machines.
It:
- Collects used coffee pucks
- Activates internal sensor detection system
- Allows machine to operate when correctly inserted
When damaged or misaligned:
- Machine may stop brewing
- “Insert grounds container” error appears
- Waste bin is not detected even when installed
Replacing the complete assembly restores correct function and sensor recognition.
🔢 Part Number
7313235401 – DeLonghi Waste Coffee Grounds Container / Dregs Drawer
🔄 Compatibility
☕ Eletta Cappuccino Top
-
ECAM45.760.B – Eletta Cappuccino Top
☕ Primadonna Class
-
ECAM550.55.SB – Primadonna Class
✔ High-end DeLonghi automatic espresso series
✔ Genuine-style replacement fit
⚠️ Important Compatibility Note
- Coffee machine is NOT included
- Please check model number underneath your machine before ordering
- Designed specifically for Eletta & Primadonna Class models
- Waste container only
⚠️ Common Faults This Part Fixes
❌ “INSERT GROUNDS CONTAINER”
❌ “INSERT DREGS DRAWER”
Common causes include:
- Broken locking tab or shaft
- Misaligned waste container
- Worn plastic guide rails
- Sensor not being triggered correctly
Even when physically inserted, the machine will not operate unless proper detection is achieved.
🔧 Key Failure Causes
1. Broken Locking Arm / Guide Tab
👉 Prevents sensor activation
👉 Machine assumes drawer is missing
2. Misalignment Inside Machine
👉 Drawer sits slightly off position
👉 Brewing cycle is blocked
3. Wear & Structural Fatigue
👉 Plastic weakens over time
👉 Causes intermittent detection faults
🛠️ Common Issues This Part Fixes
- Insert grounds container error
- Dregs drawer not detected
- Machine will not brew
- Waste bin alignment fault
- Broken dregs drawer latch or shaft
☕ Why Replace This Part?
Replacing the dregs drawer helps to:
- Restore correct sensor detection
- Eliminate brewing lockouts
- Fix persistent error messages
- Improve machine reliability
- Prevent ongoing operational faults
❓ Frequently Asked Questions
Will this fix insert grounds container errors?
Yes — if caused by broken latch, shaft, or misalignment.
Is this suitable for all Eletta machines?
No — only ECAM45.760.B and ECAM550.55.SB models listed.
Is this a full coffee machine?
No — waste coffee grounds container only.
📦 Shipping & Availability
Fast Australia-wide shipping available or local pickup in Melbourne.
📍 About Ellis Electrical
Ellis Electrical is a trusted Australian supplier of coffee machine spare parts with over 48+ years of experience.
- Authorised service agent
- Local Melbourne stock
- Fast nationwide shipping
- Expert technical support
🕒 Store Details
Ellis Electrical
14 Gladstone Road
Dandenong VIC 3175
Mon – Fri: 9:00am – 5:00pm
Sat: 9:00am – 12:00pm
