☕ DeLonghi Dinamica Coffee Machine Waste Coffee Grounds Container / Dregs Drawer ECAM350.55.W | Fix “INSERT GROUNDS CONTAINER / INSERT DREGS DRAWER” Error | Part 7313245771

Restore correct waste detection and machine operation with this genuine-style DeLonghi dregs drawer (waste coffee grounds container) designed for the Dinamica ECAM350.55.W espresso coffee machine.

This component is essential for detecting when the waste container is correctly inserted and aligned inside the machine. A broken latch, tab, or shaft will prevent proper detection and cause brewing lockout errors.

---

🔧 Product Overview

The dregs drawer is a key mechanical component in DeLonghi espresso machines that collects used coffee pucks and signals correct installation to the machine’s sensor system.

Inside the machine, a small plastic arm / tab / shaft activates a sensor lever when the drawer is correctly inserted.

When this part is damaged or broken:

• The sensor is not triggered
• The machine assumes the drawer is missing
• Brewing functions are blocked

Replacing the complete dregs drawer restores proper detection and normal operation.

---

🔢 Part Number

7313245771 – DeLonghi Waste Coffee Grounds Container / Dregs Drawer

---

🔄 Compatibility

DeLonghi Dinamica Series:

• ECAM350.55.W

✔ Exact fit replacement for selected white colour model

---

⚠️ Important Compatibility Note

• Coffee machine is NOT included
• Please check model number under your machine before ordering
• Designed specifically for ECAM350.55.W variants
• Internal waste container assembly only

---

⚠️ Common Faults This Part Fixes

❌ “INSERT GROUNDS CONTAINER”

❌ “INSERT DREGS DRAWER”

These faults occur due to:

• Broken latch / locking arm / shaft
• Drawer not fully clicking into position
• Sensor not being activated
• Misalignment of waste container

Even if the drawer is physically inserted, the machine will not operate unless it is correctly detected.

---

🔧 Key Failure Causes

1. Broken Plastic Locking Arm / Shaft

👉 Prevents proper sensor activation
👉 Machine assumes drawer is missing

2. Misalignment of Dregs Drawer

👉 Drawer sits slightly out of position
👉 Sensor lever not triggered

3. Wear & Mechanical Damage

👉 Repeated use weakens plastic guides
👉 Leads to intermittent detection failure

---

🛠️ Common Issues This Part Fixes

• “INSERT GROUNDS CONTAINER” message
• “INSERT DREGS DRAWER” warning
• Machine not starting brew cycle
• Waste container not detected
• Brewing function locked

---

☕ Why Replace This Part?

Replacing the dregs drawer will:

• Restore correct tray detection
• Fix brewing lockout issues
• Improve machine reliability
• Prevent repeated error messages
• Ensure proper waste collection

---

❓ Frequently Asked Questions

Will this fix the error message?

Yes — if the issue is caused by a broken latch, shaft, or misalignment.

Can I repair the old drawer?

No — plastic failure is not reliably repairable and will continue to cause errors.

Is this a full machine?

No — this is the waste coffee grounds container only.

---

📦 Shipping & Availability

Fast Australia-wide shipping available or local pickup in Melbourne.

---

📍 About Ellis Electrical

Ellis Electrical is a trusted supplier of coffee machine spare parts in Australia with over 50 years of experience.

• Authorised service agent
• Local Melbourne stock
• Fast nationwide shipping
• Expert technical support

---

🕒 Store Details

Ellis Electrical
14 Gladstone Road
Dandenong VIC 3175

Mon – Fri: 9:00am – 5:00pm
Sat: 9:00am – 12:00pm