DeLonghi Magnifica S / Dinamica Plus Waste Coffee Grounds Container | Dregs Drawer AS00008460 | ECAM22 / ECAM23 / ECAM350 / ECAM370 Series
Restore correct waste detection and brewing operation with this DeLonghi Magnifica S, Intensa, Cappuccino & Dinamica Plus dregs drawer (waste coffee grounds container / coffee bin) designed for multiple ECAM series coffee machines.
This replacement container is commonly required when the original drawer becomes cracked, worn, or has a broken locking tab or guide causing tray detection errors and brewing lockouts.
🔧 Product Overview
The waste coffee grounds container (dregs drawer) is an essential removable component inside DeLonghi automatic espresso machines.
It:
- Collects used coffee pucks and grounds
- Activates internal tray detection sensor system
- Allows normal brewing operation when correctly inserted
When damaged or misaligned:
- Machine stops brewing
- “Insert grounds container” error appears
- Waste bin is not detected even when installed
Replacing the full assembly restores proper operation and sensor recognition.
🔢 Part Number
AS00008460 – DeLonghi Waste Coffee Grounds Container / Dregs Drawer
✔ Front fascia NOT included (reuse from original unit)
🔄 Compatibility
☕ Magnifica S Series
-
ECAM22.110.SB – Magnifica S
-
ECAM22.360.S – Magnifica S Cappuccino
☕ Intensa / Cappuccino Series
-
ECAM23.210.B – Intensa
-
ECAM23.210.W – Intensa
-
ECAM23.450.S – Intensa Cappuccino
-
ECAM23.460.S – Cappuccino
☕ Dinamica Series
☕ Dinamica Plus Series
-
ECAM370.85.T – Dinamica Plus
✔ Multi-series compatible DeLonghi waste container
✔ Black colour assembly
⚠️ Important Compatibility Note
- Coffee machine is NOT included
- Please check model number underneath your machine before ordering
- Front fascia is NOT included (must be transferred from old drawer)
- Designed for multiple ECAM series machines listed above
- Waste coffee container only
⚠️ Common Faults This Part Fixes
❌ “INSERT GROUNDS CONTAINER”
❌ “INSERT DREGS DRAWER”
Common causes include:
- Broken locking tab or shaft
- Misaligned waste container
- Worn plastic guide rails
- Sensor not being triggered correctly
Even when physically inserted, machine will not operate if detection fails.
🔧 Key Failure Causes
1. Broken Locking Arm / Guide Tab
👉 Prevents sensor activation
👉 Machine assumes drawer is missing
2. Misalignment Inside Machine
👉 Drawer does not sit correctly
👉 Brewing cycle becomes locked
3. Wear & Structural Fatigue
👉 Plastic weakens over time
👉 Causes intermittent detection faults
🛠️ Common Issues This Part Fixes
- Insert grounds container error
- Dregs drawer not detected
- Machine will not brew
- Waste bin alignment fault
- Broken drawer latch or shaft
☕ Why Replace This Part?
Replacing the dregs drawer helps to:
- Restore correct sensor detection
- Eliminate brewing lockouts
- Fix persistent error messages
- Improve machine reliability
- Prevent ongoing operational faults
❓ Frequently Asked Questions
Does this include the front fascia?
No — fascia must be transferred from your old unit.
Will this fix insert grounds container errors?
Yes — if caused by broken latch, shaft, or misalignment.
Is this compatible with all Magnifica machines?
No — only ECAM models listed above.
📦 Shipping & Availability
Fast Australia-wide shipping available or local pickup in Melbourne.
📍 About Ellis Electrical
Ellis Electrical is a trusted Australian supplier of coffee machine spare parts with over 50+ years of experience.
- Authorised service agent
- Local Melbourne stock
- Fast nationwide shipping
- Expert technical support
🕒 Store Details
Ellis Electrical
14 Gladstone Road
Dandenong VIC 3175
Mon – Fri: 9:00am – 5:00pm
Sat: 9:00am – 12:00pm
